014-1066-045 - Follower plate for industrial pumps with shank 45 mm subgroup-Accessoires en losse onderdelen-olie afzuig units transmissions and differential gears of

transmissions and differential gears of lorries

To optimize the performance and the time-life of the air-operated pumps advise to use filtered and lubricated air

inflammable and corrosive liquids

These pumps are advised for the transfer of low-medium viscosity oil (SAE 15/130)

They allow an optimal placing in every

014-1066-045 - Follower plate for industrial pumps with shank 45 mm subgroup-Accessoires en losse onderdelen-olie afzuig units transmissions and differential gears ofIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.