Grizzly Industrial Shaper Cutter - 1/4" Rabbet, 1/2" Bore Titan Impact 740 Parts and two air supply hose

and two air supply hose quick-disconnect pod with six 1/2” Industrial Interchange (Hansen compatible) quick-disconnect couplers each

Model ADS-300 Flow (CFM) 300 Rated Pressure (PSI) 100 Maximum Pressure (PSI) 203 Connection (in) 2" NPT-F Voltage (V) 230 Refrigerant Fluid R407C Frequency (Hz) 60 Phase  Single Nominal Voltage (A) 5

Single-piece columns

5 HP CFM DISPLACED 7

Accessory Type Spray Tips & Tip Guards Compatible Paint Type Exterior Paint

Grizzly Industrial Shaper Cutter - 1/4" Rabbet, 1/2" Bore Titan Impact 740 Parts and two air supply hoseA carbide cutter thats better than a typical HSS cutters. The carbide tipped C2008 Shaper Cutter is specifically made for use on shapers with 1 2" spindles. This 1 2" bore, 2mm thick carbide cutter stays sharp longer than the old HSS cutters and is priced right, too. HSS (high speed steel) has been heat treated for hardness and wear resistance, which keeps a sharp edge longer than other carbon steels. The carbide tips are even stronger than HSS and