014-1065-050 - Follower plate for industrial pumps with shank 50 mm subgroup-Drukvaten voor olie te pompen op locatie Manual dispensing nozzle with a

Manual dispensing nozzle with a device that shuts off the flow automatically when the tank is full

This operation can be effected also for aspiration

017-1155-000 Afsluiter

Equipment suitable for the nebulisation of low density lubricating oils

To have the tyre inflator ready for use you can only put on the automatic charging mounted on the line of the compressed air

014-1065-050 - Follower plate for industrial pumps with shank 50 mm subgroup-Drukvaten voor olie te pompen op locatie Manual dispensing nozzle with aIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.