014-1064-030 - Follower plate for pumps with shank 30 mm subgroup-Druk regelaars These pumps are advised for

These pumps are advised for the transfer of medium-high viscosity oil (SAE 15/240)

suitable for the transfer of industrial and chemical fluids

Staat op een trolley zodat deze gemakkelijk te verplaatsen is

A handle provides an easy fit to the drum

een volgplaat met doorsnede van 370 mm en een vul pistool

014-1064-030 - Follower plate for pumps with shank 30 mm subgroup-Druk regelaars These pumps are advised forIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.