014-1064-050 - Follower plate for industrial pumps with shank 50 mm subgroup-Dubbelwerkende pneumatische oliepompen The follower plate is pushed

The follower plate is pushed down by the pressurised pneumatic cylinders

Those are suitable for the supply at high pressure of all kinds of grease at short and long distance

filling of central distribution plants

They are suitable for transferring a lot of types of grease

These pumps are advised for the transfer of low viscosity oil (SAE 15/80)

014-1064-050 - Follower plate for industrial pumps with shank 50 mm subgroup-Dubbelwerkende pneumatische oliepompen The follower plate is pushedIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.