tpd 32 200 2 a f a baqe gw1 96086697 Due to the 50 mm

Due to the 50 mm spherical clearances

The corrosion-resistant stainless steel clamp is securing the motor to the pump housing and allow the easy service of the pump

Pressure valves are installed either directly on the pump discharge side

Intermittent (S3) operation between 40°C and 60°C liquid temperature is permitted up to 30% (3 minutes of operation

safe handling

tpd 32 200 2 a f a baqe gw1 96086697 Due to the 50 mmSingle stage, close coupled, volute twin head pump with in line suction and discharge ports of identical diameter. The twin head pump is designed with two parallel power heads. The pump is of the top pull out design, i. e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. Each power head is fitted with an unbalanced rubber bellows seal. The shaft seal is according