CMT 299.111.00 Calibration & Sanding Disk 8" x 5/8" Bore LTS/MTS/HTS Twist Straps Designed for use with nominal

Designed for use with nominal 6x and 6x rough lumber

Back-to-Back Applications: Many Simpson straps are designed to be used back-to-back on a piece of lumber without fastener interference

5 is made from 3-gauge steel with certified welds and a Simpson Strong-Tie gray paint finish

which provides corrosion resistance suitable for typical wood-framed construction environments

006 inches per revolution - allowing the operator to match the feed rate to the material and cutting tool requirements

CMT 299.111.00 Calibration & Sanding Disk 8" x 5/8" Bore LTS/MTS/HTS Twist Straps Designed for use with nominalThe CMT 299. 111. 00 is an 8 inch calibration and sanding disk with a 5 8 inch bore for use on stationary table saws. Used for calibrating the table saw fence and for light sanding operations. Thickness 0. 110 inch. SPECIFICATIONS Disk Diameter 8 inch Bore Diameter 5 8 inch Thickness 0. 110 inch Country of Origin Made in Italy COMPATIBLE MACHINES Stationary Table Saw APPLICATIONS Calibration Sanding COMPATIBLE MATERIALS Hardwood Softwood MDF KEY