014-1064-050 - Follower plate for industrial pumps with shank 50 mm subgroup-Mobiele ontvetterbak subject to the requirements of

subject to the requirements of the application

The control unit JMCO can manage until to 4 dispensing points with 4 different products

Staat op een trolley zodat deze gemakkelijk te verplaatsen is

we recommend to use filtered and lubricated air

air operated double diaphragm pumpshave long been recognized as the most flexible pumps of the industry for handing difficult liquids at relatively low pressures and flows

014-1064-050 - Follower plate for industrial pumps with shank 50 mm subgroup-Mobiele ontvetterbak subject to the requirements ofIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.